![background image](http://html1.mh-extra.com/html/oldham/mx-32/mx-32_installation-and-operating-manual_3705471037.webp)
5
– Cleaning, servicing and maintenance
33
Chapter 5
│Cleaning, servicing and
maintenance
Cleaning
Do not use alcohol- or ammonia-based liquids to clean the central controller. If
necessary, clean the exterior of the enclosure with a damp cloth.
Maintenance and servicing
The controller does not require special servicing.
Adjustments
Caution: the settings operations in this paragraph are reserved for
authorized, trained personnel because they may compromise
detection reliability.
If it is necessary to re-adjust the sensors, this operation must only be
completed by a qualified personnel. First, the front cover must be opened
(Figure 2, ref. P) on the controller. Refer to the
Viewing the menus
paragraph
Zero adjustment
Use the following settings:
■
Channel 1: P3 (Figure 4, ref. R).
■
Channel 2: P4 (Figure 4, ref. O).
Sensitivity adjustments
Use the following settings:
■
Channel 1: P5 (Figure 4, ref. Q).
■
Channel 2: P6 (Figure 4, ref. R).
Summary of Contents for MX 32
