4
– Operating instructions
23
INI Menu (Initialization)
To quit a menu at any stage, press the
(
-
) and
(
+
) buttons
together.
This menu is used to automatically initialize the measurement curve managed
by the microprocessor with the sensor connected to the appropriate channel.
It is used in the following situations:
■
By
Oldham
when shipping new material.
■
At the initial installation.
■
When changing a sensor or a detector.
Action or result
Illustration
■
The
INI
indicator blinks.
Selecting the channel to initialize
■
Press
(
ENTER
) to confirm.
The
Channel 1
icon blinks indicating
Channel 1
has been selected.
■
To select
Channel 2
, press
(
+
).
The
Channel 2
icon blinks indicating
Channel 2
has been selected.
■
Confirm the channel to initialize by pressing
(
ENTER
).
-
ON
blinks.
- The
icon is displayed.
- The yellow indicator of the corresponding
channel blinks (the channel relays are
blocked).
Confirming initialization
■
Press:
-
(
+
) to select
Yes
. The initialization will
launch.
-
(
-
) to select
No
. The initialization will be
abandoned.
■
Confirm by pressing
(
MENU/ENTER
).
Summary of Contents for MX 32
