English
Stud Gun EP-12, EP-15
OKU Tools GmbH, 70374 Stuttgart, Germany
4
EN
1.5 Warranty
Conditions of warranty: see Standard Terms and Conditions of OKU Tools GmbH.
Assert warranty claims against OKU Tools GmbH immediately after detection of the
defect.
Warranty claims expire in each case in which liability claims cannot be made.
2 Safety information
2.1 Personnel responsible for safety
2.1.1 Operator
Operator is called any natural or legal person who is using the gun and/or on behalf of
whom the gun is used.
The operator and/or his safety officer must ensure,
•
observance of the relevant regulations, instructions and laws.
•
only qualified personnel is working with the gun.
•
personnel having the operating instructions available at any time.
•
to prohibit non-qualified personnel from working with the gun.
2.1.2 Qualified personnel
As qualified personnel are to be considered persons who were authorised by the
safety officer of the plant to perform the necessary activities and who are able to rec-
ognise and avoid potential hazards because of their education, experience, instruc-
tions and their knowledge about corresponding standards and rules for the prevention
of accidents as well as operating conditions(see IEC 364, definition for qualified per-
sonnel).
2.2 General safety instructions
These safety instructions do not claim to be exhaustive. In case of any questions,
please, contact OKU Tools.
At the time of delivery the gun is state of the art and reliable.
The gun is a source of danger for persons, for the gun itself and for other material as-
sets of the operator, if
•
it is operated by unqualified personnel.
•
it is used inappropriately.
Operate the gun only when it is in good condition.
Any upgrade, modification or redesign of the gun is basically prohibited. In this case,
please confer with OKU Tools.
