H301-OLYMPUS-IX3-SVR
User Manual
REV 03
www.oko-lab.com
Pa
ge
16
11.
Connecting the Chamber to the adapter
Follow the steps shown in the images of Figure 23 and listed below in order to correctly connect the chamber with its
adapter:
1.
Follow the arrows shown in Figure 23 Images 1 and 2 for placing the captive screws in the proper housings
2.
Place the chamber on the adapter as shown in, Figure 23 Image 3
3.
Use a 1.5mm metric Allen Wrench to tighten two of the four captive screws in place (A in Image 4) while keeping
the sliding lid closed. (See Figure 23 Image 4)
4.
Tighten the remaining two captive screws (A in Image 5) while keeping the chamber sliding lid open.
5.
Image 6 of Figure 23 shows the chamber fixed on the adapter
1
2
3
4
5
6
Captive Screw
A
A
Figure 23. How to assemble the chamber to the adapter.
