Okolab H301-OLYMPUS-IX3-SVR User Manual Download Page 12

Page: 12 / 18

H301-OLYMPUS-IX3-SVR

User Manual

REV 03

www.oko-lab.com

Working with MW Plates - Magnetic locks and Chamber ris-
er

Magnetic locks hold MW plates in place into sample holder illustrated in Figure 16

Figure 16. Magnetic locks for MW plates. Ships with 6, 12, 24, 48 MW plates.

Chamber Riser

increases chamber’s height and

is REQUIRED with 6, 12, 24, 48 MW plates, regardless of the Lid em-

ployed.

Figure 17 shows how to install and fasten the chamber riser. Screws location is indicated by letter A.

Chamber Riser

Chamber Base

Figure 17. Riser Assembly.

Connection of the Gas Supply

A single silicon tubing carries output gas from the Okolab Gas Controller to the H301-OLYMPUS-IX3-SVR. Silicon tubing

connects to a gas input - brass opening - located on a corner of the H301-OLYMPUS-IX3-SVR. See Figure 18. Connect by

gently pushing silicon tubing onto brass opening.

Summary of Contents for H301-OLYMPUS-IX3-SVR



















Search results

Summary of Contents for H301-OLYMPUS-IX3-SVR

Reviews:

Related manuals for H301-OLYMPUS-IX3-SVR

Brands by name

Popular brands

Okolab H301-OLYMPUS-IX3-SVR, User Manual

Search results

Summary of Contents for H301-OLYMPUS-IX3-SVR

Reviews:

Related manuals for H301-OLYMPUS-IX3-SVR

Brands by name

Popular brands