Okolab H301-NIKON-TI-SR User Manual Download Page 3

Page: 3 / 13

H301-NIKON-TI-SR

User Manual

March 2015

www.oko-lab.com

Components and dimensions

H301-NIKON-TI-SR includes the following components:



Chamber main body

with embedded temperature sensor



Sliding heated glass lid

with Indium Tin Oxide (ITO) conductive coating and embedded temperature sensor



Integrated humidity module

. It is not necessary to select an additional humidity module

Distance between focal plane

and upper side of the glass lid

Chamber top view

Sliding Lid

Chamber Base

Sample Holder-Order Separately

Integrated Humidty Module

Figure 1. H301-NIKON-TI-SR - Components and Dimensions.

Sample Holders

2.1

Available Sample Holders

The following sample holders are available.

NOTE:

Please contact

[email protected]

if you cannot find the sample holder you are looking for. We are constantly

adding new inserts to the list.

1x35-M single

#1 35mm Petri-dish

1xGS-M single

#1 1x3in. chamber slide

1xLABTEK-M single

#1 Lab-Tek 1in.x2in. chambered cover glass

1xLABTEK-II-M single

#1 Lab-Tek II 1in.x2in. chambered cover glass

1x60-M single

#1 60mm Petri-dish

Summary of Contents for H301-NIKON-TI-SR














Search results

Summary of Contents for H301-NIKON-TI-SR

Reviews:

Related manuals for H301-NIKON-TI-SR

Brands by name

Popular brands

Okolab H301-NIKON-TI-SR, User Manual

Search results

Summary of Contents for H301-NIKON-TI-SR

Reviews:

Related manuals for H301-NIKON-TI-SR

Brands by name

Popular brands