OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Connecting the interface cables
6-4
6.3
Connection method
Cautions
Before connecting or removing the interface cables, always turn off the power of the Printer and
connected devices.
Using an interface cable, connect the interface connectors at the lower right of the rear side of the
Printer and the corresponding connector on the connecting computer.
Since cable types and cable destinations differ depending on the connection configuration of the
Printer, confirm that the cables meet the connection specifications (see Figure 6.2).
Ethernet: IEEE 802.3ab, IEEE 802.3u or IEEE 802.3 compatible Ethernet interface
(1000BASE-T, 100BASE-TX or 10BASE-T)
8-pin modular jack connector (RJ-45)
Figure 6.2 Ethernet connector positions
Ethernet