OKI Data Infotech Corporation CONFIDENTIAL
Chapter 2 Site preparation check
2-3
2.2
Installation surface
The conditions for the installation surface are listed below.
(1) Install on a flat surface.
A flat surface is required to:
- Maintain equal load on casters; and
- Keep the Printer level.
(2) The surface must be strong enough to support the load of the Printer.
The floor strength to support the casters is shown below.
Weight (including consumables):
Basic Printer Model:
185 kg (407.86 lb) (including consumables)
Multifunction Printer Model:
205 kg (451.95 lb) (including consumables)
Load for a single caster:
75 kg (165.34 lb) or less
Figure 2.2 shows the loading points on the floor.
Units: mm (inch)
Figure 2.2 Caster positions