111
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
Paper Parameters
n
Size of Automatically Supplied Paper (only with HP-GL, TIFF, and CALS)
Sets the size standard of the supplied paper when the Paper Supply Mode is set to
Continuous or Optimal.
<Parameter by selecting options>
n
: Default value
n
A Series
Automatically supplies A series paper.
ARCH Series
Automatically supplies ARCH series paper.
ANSI Series
Automatically supplies ANSI series paper.
30x42 Series
Automatically supplies 30x42-inch series paper.
MAP Series
Automatically supplies Map series paper.
DIN Series
Automatically supplies DIN series paper.
User Defined Series
Automatically supplies user defined series paper.
Note
The default value varies depending on the the Printer initialization category.
n
Paper Supply Mode
Sets the paper supply conditions for the paper to be printed on.
<Parameter by selecting options>
n
: Default value
n
Continuous
The Printer prints continuously from the small roll to the large
roll when each drawing requires no clipping.
Optimal
The Printer prints on the optimal roll for minimizing blank
space. When the optimal roll is not installed, the Printer
suspends the printing process, and requires the paper
replacement.
Roll 1
The Printer prints on the roll 1 paper.
Roll 2
The Printer prints on the roll 2 paper.
Note
The default value varies depending on the Printer initialization category.
