Oki S900, Service Manual

Page: 16 / 65

S900
2-8
2.4.2.2 PLACING DOCUMENT(S) IN THE ADF
1. Make sure your document is free of staples, paper clips and is not torn out.
2. If you have multiple pages, fan your document(s) to avoid occasional paper jam. The ADF can
hold up to 50 pages at one time.
3. Place your document(s) with the text FACE UP in the ADF and make sure that the top of the
pages is fed in first.
4. Adjust the Paper Guides to center the document(s) in the ADF.
2.5 TRANSPORTATION
To move the S900 from where it is installed, for repair or any other reason, make sure to observe the
following conditions:
(1) Turn off the power of the S900.
If the scanning head is located at a place other than front of the glass, turn the S900 on to return
the scanning head to the front of the glass. After the scanning head is returned to the home
position, turn the power supply off.
(2) Move the lock switch to the locked position.
(3) Remove the power and printer cables.
(4) Put the S900 in the packing case with the packing material.