Oki Pro9541WT, User Manual, Page: 62 / 126

- 62 -
Connecting the PC
Appendix
Printing
3
Setting Up
2
B
efore use
1
Basic D
evice Oper
ations
4
Index
„
Setting the IP Address in the PC
Note
z
If the IP address has already been set in the PC or is
acquired automatically, go to “Setting the IP Address in
the Device Using the Control Panel” (P.59) .
1
Turn ON the PC power supply to start
Windows.
2
Click [Start], and select [Windows
System] > [Control panel].
3
Click [View network status and tasks].
4
Click [Ethernet], and then click
[Properties] in the "Ethernet" window.
5
Select [Internet Protocol Version 4 (TCP/
IPv4)], and click [Properties].
6
Enter the IP address, Subnet mask,
Default gateway, and DNS server, and
click [OK].
Memo
z
If acquiring the IP address from the DHCP server
automatically, select "Obtain an IP address
automatically", and do not enter an IP address.
z
Do not enter if not using a Default gateway or DNS
server.
7
Close the "Local Area Connection
Properties" window.