manualshive.com logo in svg

Oki Pro8432WT, User Manual, Page: 78 / 128

Share
Download
Oki Pro8432WT User Manual Download Page 78

- 78 -

Other Error Messages

3

3.

 

Troubleshooting

●

●

Other Error Messages

This section explains the causes and remedies for an error message and the function of the 

<

ATTENTION

> indicator. An error message appears on the display screen of the operator panel. 

To display an error code, press the <

HELP

> button on the operator panel.

Error Messages

Error 

code

Message

<ATTENTION> 

indicator

Cause/Remedy

420

Press ONLINE button for Restoration 

Memory Overflow

Blinks

The memory overflowed.

Reduce the data amount. If that does not 

work, reduce the size of the print data.

310

311

%COVER% Open.

Please see HELP for details

Blinks

The cover is open.

Close the cover.

310 : Output tray

311 : Front cover

320

348

Check Fuser Unit

Please see HELP for details

Blinks

The fuser unit is not correctly installed.

Install the fuser unit correctly in a printer.

Check Data

Message Data Write Error<%CODE%>

Lights up

Writing of message data to be uploaded to a 

printer has been failed.

610

611

612

613

Toner Not Installed

%COLOR%

Please see HELP for details

Blinks

The toner cartridge of the indicated color 

is not installed correctly. Install the toner 

cartridge correctly.

610 : Yellow (Y)

611 : Magenta (M)

612 : Cyan (C)

613 : White (W)

544

545

546

547

Check Toner Cartridge

Improper Lock Lever Position

%COLOR%

Please see HELP for details

Blinks

The toner cartridge of the indicated color is 

not locked properly.

Turn the blue lever on the right side of the 

cartridge backwards until it stops.

544 : Yellow (Y)

545 : Magenta (M)

546 : Cyan (C)

547 : White (W)

540

541

542

543

Toner Sensor Error

%COLOR%

Please see HELP for details

Blinks

Something is wrong with the toner sensor of 

the indicated color or the image drum is not 

installed correctly.

Install the toner cartridge or image drum of 

the indicated color correctly.

540 : Yellow (Y)

541 : Magenta (M)

542 : Cyan (C)

543 : White (W)

430

440

Install Paper Cassette

%TRAY%

Please see HELP for details

Blinks

A paper cassette is not in the indicated tray.

Insert the paper cassette into the indicated 

tray.

If the cassette is already inserted in the 

printer, pull out the cassette and set it again 

to correctly locate it.

430, 440 : Tray1

356

Install New Belt Unit

Belt Unit Life

Please see HELP for details

Blinks

The belt unit is at the end of its life.

Replace it with a new belt unit.

File System is Full

Lights up

The file system is full.

Summary of Contents for Pro8432WT

































































































































Reviews:

No comments