Oki PRO330S, User Manual

Page: 60 / 280

- 60 -
Setting the time that elapses before the power is
turned off automatically (AUTO PW OFF)
The power is automatically turned off if the machine has not been used for a certain period of
time. In the factory default state, the power will not be turned off automatically. In order to
make the power turn off automatically, set the time from when AUTO PW OFF is set to ENABLE
until the power turns off on the operator panel. The factory default setting is 4 hours.
Enabling AUTO PW OFF
1
Check that "READY TO PRINT" appears on the display.
2
Press « ∧ » or « ∨ » several times to display [ADMIN SETUP], and then
press «OK».
3
Input the password when [ENTER PASSWORD] is displayed.
•
The default password is "999999".
4
After you have input the password, press «OK».
5
Press « ∧ » or « ∨ » several times to display [POWER SETUP].
6
Press «OK».
[AUTO PW OFF] is displayed.
7
Press «OK».
8
Press « ∧ » or « ∨ » several times to display [ENABLE] or [AUTO CONFIG],
and then press «OK».
9
Press «BACK» or «ONLINE» until "READY TO PRINT" appears on the display.
Setting the time that elapses before the power is turned off
1
Check that "READY TO PRINT" appears on the display.
2
Press « ∧ » or « ∨ » several times to display [MENUS], and then press «OK».
3
Press « ∧ » or « ∨ » several times to display [SYSTEM ADJUST].
4
Press «OK».
[SYSTEM ADJUST] is displayed.
5
Press « ∧ » or « ∨ » several times to display [AUTO PW OFF TIME], and
then press «OK».
6
When the setting value flashes, press « ∧ » or « ∨ » to display your
desired value, and then press «OK».
7
Press «BACK» or «ONLINE» until "READY TO PRINT" appears on the display.