Oki Pro1040, Maintenance Manual

Page: 79 / 118

- 79 -
Printer Maintenance
Cleaning the Printer
This section describes how to clean the various
parts of the printer.
Cleaning Device Surfaces
Note
z
Do not use Benzene or thinner as it may damage plastic
parts and coating.
z
Only use water or neutral washing agent.
z
It is not necessary to oil the device. Do not oil it.
1
Press and hold the <POWER> button
for approximately 1 second to switch off
the power supply.
Wait a moment, and the LED lamp on
the <POWER> button will turn OFF.
2
Take water or neutral washing agent on
one piece of cotton cloth, and wipe with
thoroughly squeezed cloth.
Furthermore, wipe off with another dry
cotton cloth.
Cleaning the Inside of the Printer
1
Press and hold the <POWER> button
for approximately 1 second to switch off
the power supply.
Wait a moment, and the LED lamp on
the <POWER> button will turn OFF.
2
Grasp the top cover open lever and
open the top cover.
3
Prepare some newspaper or something
to spread on a flat surface on which to
place the print cartridge set, as well as
some paper so it is not exposed to light.