Oki OKIPAGE 6e, Service Manual, Page: 64 / 262

Parts Replacement 3 - 9 OKIPAGE 6e/6ex
Service Manual, P/N 59276401
3.3.3 LED Head
(1) Open the stacker cover.
(2) Remove the flexible cable (LED)
1
from the PC connector
2
of the LED head
3
.
(3) Remove the LED head by prying the left side free from the retaining clip.
Note: Be careful to not lose the contact (LED) 4.
Note:
• Be sure not to directly touch or push the SLA part of the LED head.
• After mounting the new LED head, set drive time of the LED head according to the
marking on the LED head (see 4.3.1 or 4.3.2).
• For the installation of the flexible cable (LED)
1
, install the PC connector
2
to the
flexible cable (LED)
1
first, then connect the LED head
3
to the PC connector.
• When installing a new LED head, be careful not to lose the contact (LED) 4.
3
SLA part
2
1
3
4
3
2
1
OKIPAGE 6ex
OKIPAGE 6e
Retaining Clip