
Troubleshooting
6 - 15
OKIPAGE 6e/6ex
Service Manual, P/N 59276401
Category
Jam errors
tray
FEED JAM
LCD status message
Trouble or status
Remedy
– Open the cover, remove the
paper, then close the cover.
When the cover is closed,
recovery printing is carried out
and the error display is released.
– If this error occurs frequently,
see 6.5.2
2
-3.
Jam occurred during paper ejecting.
– Check the paper in the tray or
check to see if more than one
sheet of paper were being fed
simultaneously.
– Set the designated paper in the
tray.
– Open the cover, then close it to
carry out recovery printing and
release the error display.
– If this error occurs frequently,
see 6.5.2-
3
.
Paper of improper size is being fed
from the tray being displayed.
tray: TRAY 1, TRAY 2, FEEDER
Load paper in the tray.
The tray being displayed has run
out of paper.
tray: TRAY 1, TRAY 2, FEEDER
Paper size error
Tray paper out
PAPER
EXIT JAM
tray
SIZE ERR
tray
PAPEROUT
A jam occurred during paper feeding
after completion of paper hopping
from the tray being displayed.
tray: TRAY 1, TRAY 2, FEEDER
– Open the cover, remove the
paper, then close the cover.
When the cover is closed,
recovery printing is carried out
and the error display is released.
– If this error occurs frequently, see
6.5.2
2
-2.
Table 6-2 (Cont'd)
Summary of Contents for OKIPAGE 6e
