Oki OKIFAX OF-38, Field Service Manual

Page: 93 / 284

Function Name
Activity Report
Active Memory
Total
Rx Total
Copy Total
Enable Disable Subparameter Subparameter is in
O n l y Only not entered yet advance entered
590
591
592
593
594
Notes: 1)
“Enable-Disable Toggle” denotes that the programmed function will be
alternately enabled and disabled each time the program-assigned key is pressed,
regardless of the default state for the particular function.
“Enable Only” denotes that the programmed function will be enabled when the
assigned key is pressed and remain valid only on a onetime basis until the
process communication completes.
“Disable Only” denotes that the program-denied function will be disabled when
the assigned key is pressed and remain invalid until the communication in
process is completed.
“Subparameter not entered yet” means that the programmed function will
require entry of one or more subparameters by the operator before the
communication is started.
“Subparameter is in advance entered” means that the programmed function
includes the required -this means that the operator must enter
the desired at the time of programming, but he need not enter
the parameter(s) at the time of communication.
Use the following listed subparameter values in programming the relevant
functions.
The MSG CONF feature must be specified by the use of PO + “21”.