SETTING UP YOUR PRINTER > 20
B
OTTOM
FEED
CONTINUOUS
FORM
FAN
-
FOLD
PAPER
Ensure that the printer is switched
OFF
and the power supply lead
removed.
1.
Place the printer on a slotted printer stand, carefully aligning
the slot in the stand with the slot in the base of the printer.
2.
Place a box of fan-fold paper under the printer stand.
3.
Remove the
Access cover.
4.
Move the
Bail arm lever
(2) (on the left-hand side of the
printer) to the front of the machine to lift the
Bail bar
.
5.
Move the
Paper lever
(3) (on the right-hand side of the printer)
to the front of the machine, to the
fan-fold
symbol.
6.
Insert the first sheet of paper through the opening in the
printer stand and the bottom of the printer.
7.
Adjust the
Platen sprocket
(s) to align with the sprocket holes
in the paper.
8.
Use the
Platen knob
to gently pull the paper up until it appears
in front of the platen, and above the Bail bar
9.
Move the
Bail arm lever
to the rear of the machine to lower the
Bail bar
(6).
10.
Use the
Platen knob
(5) to advance the paper to the first
printing line.
11.
Replace the
Access cover
and switch the printer
ON.
Summary of Contents for ML280 Elite
Page 1: ...ML280 ELITE user s guide...
