Oki MC780f User Manual Download Page 342

Page: 342 / 380

8.[Administration] Tab Page

[Registration] ([Administration] tab) How to Set and How to Operate 341

8 [Administration] Tab Page

Click [Save].

The contacts are added as destinations.

Selecting the groups from the address book

By this method, you can select groups from the address book.

Click [Destination Setting] to open the Recipient List page.

Click [Address Group].

The Address Group page is displayed.

Select the [Group] check boxes that contain the desired destinations.

Click [Add].

All destinations in the selected groups are added to the Recipient List page.

You can remove destinations that you have added to the Recipient List before saving the destination settings.

P.343 “Removing the destinations from the Recipient List”

Click [Save].

The contacts are added as destinations.

Summary of Contents for MC780f





























































































































































































































































































































































































Search results

Summary of Contents for MC780f

Reviews:

Related manuals for MC780f

Brands by name

Popular brands

Oki MC780f, User Manual

Search results

Summary of Contents for MC780f

Reviews:

Related manuals for MC780f

Brands by name

Popular brands