Oki MC573, Advanced Manual

Page: 336 / 507

- 336 -
9. Operating Management/ Specifications
XPS Setup
SIDM Setup
IBM PPR Setup
Network PS-Protocol RAW Specifies PS communication protocol
mode of data from Network.
USB PS-Protocol RAW Specifies PS communication protocol
mode of data from USB.
PDF Paper Size Current Tray Size Set the paper size when printing with
PDF Direct Print.
PDF Scaling Size 99% Sets reduction rate for PDF when
[PDF Paper Size] is set to [Scaling
Size].
PDF Print Mode High Quality Sets the priority order between the
print quality and print speed when
printing PDF.
Item Factory default setting Description
DigitalSignature OFF Sets the DigitalSignature functions.
DiscardControl Auto Sets the DiscardControl function.
MC Mode ON Sets the MarkupComaptibility
function.
Unzip Mode Speed Sets the XPS file decompression
method.
White Page Skip OFF Selects whether to output blank pages
in XPS.
Item Factory default setting Description
SIDM Manual ID# 2 Set up Pn specified in MANUAL by
MANUAL-1 ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
SIDM Manual2 ID# 3 Set up Pn specified in MANUAL by
MANUAL-2 ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
SIDM MP Tray ID# 4 Set up Pn specified TRAYO (MP Tray)
by MP Tray ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
SIDM Tray1 ID# 1 Set up Pn specified TRAY 1 by Tray 1
ID No.FX/PPR Emu in CSF control
command (ESC EM Pn).
Item Factory default setting Description
SIDM Tray2 ID#
(Optional) 5 Set up Pm specified TRAY 2 by Tray 2
ID No.FX/PPR Emu in CSF control
command (ESC EM Pn).
SIDM Tray3 ID#
(Optional) 6 Set up Pn specified TRAY 3 by Tray 3
ID No.FX/PPR Emu in CSF control
command (ESC EM Pn).
Item Factory default setting Description
Character Pitch 10 CPI Specifies character pitches in IBM
PPR emulation.
Font Condense 12CPI to 20CPI Specifies 12CPI pitches for Condense
Mode.
Character Set SET-2 Specifies a character set.
Symbol Set IBM-437 Specifies a symbol set.
Letter O Style Disable Specifies the style that replaces 9BH
with letter o and 9DH with a zero.
Zero Character Normal Sets the zero to be slashed or
unslashed.
Line Pitch 6 LPI Specifies the line spacing.
White Page Skip OFF Selects whether to print blank pages.
CR Function CR Selects a carriage return from [CR] or
[CR+LF].
LF Function LF Selects a line feed from [LF] or
[LF+CR].
Line Length 80 Column Specifies the number of characters
per line.
Form Length 11.7 inch or 11 inch Specifies the length of paper.
TOF Position 0.0 inch Specifies the distance from the top
edge of paper to where the cut is to be
made.
Left Margin 0.0 inch Specifies the distance from the left
edge of paper to where the cut is to be
made.
Fit To Letter Disable or Enable Sets the printing mode that can fit
paper to the printable area equivalent
to 11 inches (66 lines).
Item Factory default setting Description