Oki MC573, Advanced Manual

Page: 325 / 507

- 325 -
9. Operating Management/ Specifications
• Default Settings
Copy Setup
Item Factory
default
setting
Description
Color Mode Auto Select Auto / Color / Mono (Grayscale).
Scan Size A4 or
Letter Sets the default scan size.
Duplex Copy OFF(Sim
plex) Sets the default setting of whether to turn
duplex copying on or off, and the default
binding position.
Zoom 100% Sets the default zoom rate.
Sort ON Sets whether to collate copied documents by
default.
Image Settings Density 0 Sets the default density.
Document Type Text &
Photo Sets the default image quality.
Resolution Normal Sets the default resolution.
Background Removal Auto Sets the default background removal.
Show-Through Removal Middle Sets the default value of the show-through
removal function.
Contrast 0 Sets the default contrast.
Hue 0 Sets the default value of the hue.
Saturation 0 Sets the default value of the saturation.
RGB R:0, G:0,
B:0 Sets the default value of RGB contrast.
Direction Portrait Selects the default page orientation of
documents.
ID Card Copy OFF Sets whether to use the ID card copy mode by
default.
Continuous Scan OFF Sets whether to use Continuous Scan mode.
Mixed Size OFF Sets whether different sized documents are
copied on each size paper by default.
Margin Setting OFF Sets the default margins.
Front Left 0 mm (0
inch) Available range: 0 to ±25 mm (0.0 to 2.0 inch)
(1 mm increment)
Top
Back Left
Top
Edge Erase Setting ON Sets whether to erase the shade created in
the surrounding of 2-page spread documents
by default.
Width 2 mm (0.1
inch) Sets an erasing width.
Available range: 2 to ±50 mm (0.1 to 2.0 inch)
(1 mm increment)
Omit Blank Page OFF Sets whether to enable or disable the white
page skip function.
Watermark Page Number Setting OFF Sets whether to add the page number as
watermarks.
Start Number 1 Sets the start number of the page number.
Position Lower
Right Sets the printing position of the page number.
String User Name OFF Sets whether to add the user name as
watermarks.
Model Name OFF Sets whether to add the model name as
watermarks.
Date / Time OFF Sets whether to add the date and time as
watermarks.
Free Word OFF Sets whether to add a character string as
watermarks.
String (NULL) Sets a character string.
You can register up to 64 alphanumeric
characters.
Position Lower
Left Sets the printing position of the character
string.
Font Size 10 point Sets the font size.
Available range: 8 to 24 points
Item Factory default setting Description
Configure Shortcuts 01: Scan Size
02: Paper Feed
03: Duplex Copy
04: N-in-1
05: Zoom
06: Direction Sets the shortcut button for the [Copy] tab.
Item Factory
default
setting
Description