Oki MC573, Advanced Manual

Page: 214 / 507

- 214 -
5. Fax
To hear the monitor sound during fax transmission and reception, set as described below.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press or several times and press [User Install].
5
Press or several times and press [Monitor Control].
6
Select a monitor control.
7
Press [Back] until the home screen is displayed.
If [Forwarding Setting] is enabled, you can automatically forward received faxes to a
specified destination as fax documents.
• If [Forwarding Setting] is enabled, the machine does not print received faxes.
• If [Reception Mode] is set to [Tel Ready Mode], the forwarding function is disabled.
Register a forward destination by following the procedure below.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Fax Setting].
6
Press or several times and press [Forwarding Setting].
7
Press [ON].
8
Enter a forward destination number.
9
Press [OK].
10
Press [Back] until the home screen is displayed.
Setting So That You Can Hear Line Monitor Sound Forwarding a Fax to Another Fax Number