Oki MC573 Advanced Manual Download Page 167

Page: 167 / 507

- 167 -

5. Fax

You can select a destination from the most recent 50 records in the transmission history or
reception history.

The reception history that is displayed on the panel shows receptions with Fcode polling only.

Performing Confidential Communication and Bulletin Board Communication (Fcode Communication)

Press [Redial] on the [Fax] tab.

Press a destination.

The check mark on the left side of the destination turns on. You can select multiple
destinations.

When you complete the selection of all the destinations, press [OK].

Press the

(START) button.

Press [Display All] on the [Fax] tab.

Press [Delete] of a destination to delete.

When you complete the selection of all the destinations to delete, press
[Back].

•

If you have deleted all the destinations, the screen automatically returns to the start
screen.

Specifying a Destination from Transmission History and
Reception History

Deleting a Specified Destination

Summary of Contents for MC573




























































































































































































































































































































































































































































































































Oki MC573, Advanced Manual, Page: 167 / 507

Search results

Summary of Contents for MC573

Reviews: