Installing Options
- 24 -
6
Insert the additional RAM into the slot
and push it toward the machine.
7
Attach the bracket and then tighten the
screw in the right direction.
8
Plug the Ethernet cable and USB cable
into the machine.
9
Attach the connector cover.
10
Plug the AC cable into your machine, and
then turn on the power switch.
11
Press the <
SETTING
> key on the
operator panel.
12
Press the to select [
View
Information
] and press .
13
Check that [
System Information
] is
selected and press .
14
Check that the value of [
Total Memory
]
has increased.
- Press to scroll along the screen.
- For memory expanded to 256 MB it is [
512 MB
],
for memory expanded to 512 MB it is [
768 MB
].
Note
If the value of [
Total Memory
] has not increased, turn off
your machine and unplug the AC cable and Ethernet or
USB cable, and then reinstall the additional RAM.
Installing the 16-GB SD Memory Card
(for MC561dn Only)
When increasing the capacity of the SD memory
card, replace the SD memory card (4 GB) with
16 GB SD memory card.
Note
Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
You can not use the SD memory cards with the protection
switch for wrong overwriting with locked. Make sure to
release the lock.
1
Turn off your machine, and then unplug
the AC cable and Ethernet or USB cable.
Reference
"Turning Off Your Machine" P. 19
2
Remove the connector cover while
pressing the lock button (1) on the right
side of the machine.
3
Unplug the Ethernet cable or USB cable
form the machine.
4
Touching the metallic parts of the
machine will result in an electric shock.
5
Loosen the screw (2) in the light
direction and then remove the
bracket (3).
OK
OK
1
2
3
