Installing Your Machine
- 16 -
Installing Your Machine
This section explains how to unpack your machine and how to turn it on and off.
Unpacking Your Machine
Note
The image drum (the green tube) is very delicate. Handle
it carefully.
Do not expose the image drum unit to direct sunlight or
very bright interior light (approximately more than
1500lux). Even under the normal interior light, do not
leave it for more than 5 minutes.
Packaging and cushioning material is required at the time
of shipping the machine. Do not throw it away, and please
keep it.
1
Remove your machine from the box and
remove cushioning materials and a
plastic bag from your machine.
The accessories are packed within the cushioning
material (1).
2
Lift your machine and place it where it is
to be installed.
3
Remove the protection tapes (2) at the
tome and sides of your machine to take
out cushioning materials (3).
4
Remove the protection tapes (4) to open
the MP tray.
5
Remove the protection tape (5) to pull
the paper up.
6
Close the MP tray.
It may cause injury!
At least two people are needed to lift the machine
safely because it weighs about 29 Kg.
CAUTION
1
2
2
3
4
5
