Oki MC160N Page 149 User Manual Download

Page: 149 / 268

149

Using the Scanner

Deleting a Queued Transmission Job

The list of jobs queued for transmission can be displayed, and a job can be
deleted.

In the main screen (Scan mode), press the up or down arrow key to select
CANCEL RESERV., and then press the Enter

key.

Press the up or down arrow key to select the job to be deleted, and then
press the Enter

key.

To check the information for the selected job, press the key.

If no jobs are queued for transmission, NONE appears.

Press the up or down arrow key to select YES, and then press the Enter

key.

The main screen (Scan mode) appears again.

Summary of Contents for MC160N













































































































































































































































































Search results

Summary of Contents for MC160N

Reviews:

Related manuals for MC160N

Brands by name

Popular brands

Oki MC160N, User Manual

Search results

Summary of Contents for MC160N

Reviews:

Related manuals for MC160N

Brands by name

Popular brands