Basic Settings for Faxing (for MB471, MB491, ES4191 MFP only)
- 43 -
Setup
1
Connecting PBX, Home Telephone or
Business Phone
Plug the [
Telephone cable
] connected to the
[
Public Line (Analog)
] into the [
LINE
connection
] of your machine.
Remove the telephone connector cover.
Plug the telephone cable connected to a control
device including PBX, etc. into the [
TEL
connection
] of your machine.
- Home Telephone -
In general, many telephones are connected with
one or two telephone lines, and the internal
communication and door phone can be done. This
is simple switching equipment for household.
- Business Phone -
In general, it can accommodate more than two
telephone lines, these telephone lines can be
shared with a lot of telephones, and the internal
communication can be done. This is simple
switching equipment.
Connecting as an Internal Telephone
Plug the [
Telephone cable
] connected to a
control device including PBX, etc. into the [
LINE
connection
] of your machine.
Memo
z
Set [
PBX Line
] to [
ON
]. Refer to
in detail.
Settings for each dialing type
The factory default [
MF (Tone)/DP (Pulse)
] is
set to [
Tone
].
z
For push-button phones, if you hear a "Beep, boop,
beep" sound, leave [
MF (Tone)/DP (Pulse)
] as
[
Tone
].
z
For push-button type phones, if you do not hear a
"Beep, boop, beep" sound, or if you are using a
rotating-dial type phone, set [
MF (Tone)/DP
(Pulse)
] to [
Pulse
].
How to Configure Settings
1
Press the <
SETTING
> key on the
operator panel.
2
Press the to select [
Admin Setup
],
and press .
3
Enter the administrator password.
The factory default password is "aaaaaa".
4
Select [
Enter
], and press .
5
Press the to select [
User Install
],
and press .
6
Press , select [
MF (Tone)/DP
(Pulse)
], and then press .
LINE connection
TEL connection
Telephone cable
Public Line
(Analog)
Control device
including PBX,
etc.
LINE connection
Public Line
(Analog)
Telephone cable
Control device
including PBX,
etc.
OK
OK
OK
OK