Basic Settings for Faxing (for MB471, MB491, ES4191 MFP only)
- 40 -
z
Basic Settings for Faxing (for MB471, MB491,
ES4191 MFP only)
This section explains basic settings for faxing. Be sure to configure the following settings before you transmit faxes.
Setting for Country Code
Note
z
Please select the correct country code.
z
If [
Country Code
] is set to wrong value, there is a possiblity that
the fax transmission and reception can not be worked correctly.
Though the line connection is correctly, when the fax transmission
and reception is failed, ensure the [
Country Code
] setting first.
1
Hold down the power switch for about a
second to turn on the power.
2
Press the <
SETTING
> key on the operator panel.
3
Press the to select [
Admin Setup
]
and then press .
4
Enter the administrator password.
The default password is "aaaaaa".
a
Press , , , to select the
character you want, and then press
.
- The selected character is entered as “*”
in the text filed.
- If you have entered an incorrect value,
press the <
CLEAR
> key and then
enter the correct value.
b
Repeat step a until all characters
required are entered.
c
Press the and to select [
Enter
] and
press .
5
Press the to select [
Fax Setup
] and
then press .
6
Press the to select [
Fax Setting
] and
then press .
7
Press the to select [
Country Code
]
and then press .
8
Press the or to select your country
name and then press .
If your country name is not displayed, select
the following value.
- If your country is Czech Republic or
Slovakia, select [
Czech/Slovakia
].
- If your country is Canada, select [
U.S.A
].
- If the region of your country is Latin
America, select [
Latin America
].
- If the region of your country is Europe or
Middle East, select [
International
].
Settable Country Code:
9
If the confirmation message is displayed
then press .
The machine will re-start automatically
and the default screen will be displayed a
few minutes later.
10
Hold down the power switch for about a
second to turn off the power.
Memo
z
If the Country Code is changed, the value of [
PBX Line
]
and [
MF (Tone)/DP (Pulse)
] are changed to the default
values for each Country Code.
OK
OK
U.S.A. International United Kingdom Ireland
Norway Sweden Finland Denmark
Germany Hungary Czech/Slovakia Poland
Switzerland Austria Belgium Netherlands
France Portugal Spain Italy Greece Australia
New Zealand Singapore Hong Kong Latin
America Mexico China Russia Taiwan Japan
Korea Thailand Malaysia Jordan Argentina
Brazil South Africa Belarus Moldova Turkey
Ukraine
OK
OK
OK
OK
OK
OK