Oki MB472dn User Manual Download Page 420

Page: 420 / 1137

WSD Scan Setup

Sets WSD Scan.

PC Scan Mode

Sets PC Scan mode.

Print From USB Memory Setup

Set Print From USB Memory.

Print Setup

Item

Description

Print Setup Sets the number of copies, resolution, and other settings. When using the printer driver, the values that

are set with the printer driver are given priority over these settings.

Printer

Adjust

Sets manual timeout, jam recovery, and other print adjustment settings.

Position

Adjust

Adjusts front X, front Y, back X and back Y positions.

Drum

Cleaning

Sets cleaning of an image drum.

Hex Dump

Displays all the received print data in hex. To exit this mode, restart the machine.

System Configuration

Sets operation modes, alarm release, and other machine operation settings for each situation.

Emulation PCL Setup

Sets PCL.

XPS Setup

Sets XPS.

IBM PPR

Setup

Sets IBM PPR Setup.

EPSON FX

Setup

Sets EPSON FX Setup.

Management

You can set local interface, system settings, power save mode, memory setting, change password, default value reset, or other device

settings.

Item

Description

Local Interface USB Menu Sets USB.
System Setup

Sets access control, display units, and other settings.

Power Save

Sets power save settings.

Memory Setup

Sets the reception buffer size and resource save area.

Admin Password

Sets an administrator password.

Reset Settings

Initializes all the data that is set in "Management", including speed dial, copy and fax function settings.

User Install

Item

Description

Power Setup

Sets Auto power off and Power supply Return.

Fax Setup

Sets a fax line, sender, and other settings.

Time Setup

Sets the time to the machine.

Note

If you select [Auto], you cannot set the time from the operator panel.

Other Settings

Sets High humid mode and Quiet mode.

Job List

419

Summary of Contents for MB472dn


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MB472dn

Reviews:

Brands by name

Popular brands

Oki MB472dn, User Manual

Search results

Summary of Contents for MB472dn

Reviews:

Brands by name

Popular brands