Oki MB451wMFP, User Manual

Page: 22 / 198

Installing Options
- 22 -

Installing Options
This section explains how to install options on your machine. The following options are available:

Second tray unit (MB461, MB471, MB471w, MB491, ES4161 MFP, ES4191 MFP only)
Note

Be sure to hold down the power switch for about a second to turn off the power and unplug the AC cable and Ethernet or USB
cable before installing options. Installing options while your machine is turned on may damage your machine and options.
Reference

For details on the location of each component of the machine, refer to "Names of Components" P. 15 .
Installing a Second Tray Unit
(MB461, MB471, MB471w, MB491,
ES4161 MFP, ES4191 MFP only)
Install an optional second tray unit (tray 2) when
you want to increase the paper capacity of your
machine. After installation, you need to configure
the printer driver settings.
Reference

For the specification of the second tray unit (Tray2), refer
to
"Loading Paper" P. 32 .
Installation
1
Hold down the power switch for about a
second to turn off the power, and then
unplug the AC cable and the Ethernet or
USB cable.
Reference

"Turning Off Your Machine" P. 20
2
Lift your machine and align the three
pins of the second tray unit with the
holes at the bottom of your machine.
3
Place your machine on the second tray
unit gently.
4
Attach the lock parts.
5
Plug the AC cable and Ethernet or USB
cable into your machine, and then push
the power switch.
Model Number : N22204A