84
LP-2050/LP-2050-MF User's Manual for Basic Printer Operation
Paper Menu
In the Paper menu, set the roll paper type and size standard.
Note
The screen displays the paper size standards to be selected only when they
are activated in Available Size Standards in the system parameters.
Rolls 1 to 4 Paper Types
Sets the type of paper to use.
<Parameter by selecting options>
n
: Default value
n
Paper
Plain paper
Tracing
Tracing paper
Film
Matte film
Rolls 1 to 4 Size Standards
Roll paper with the following widths can be installed in the Printer.
On installing the roll paper in the roll feed unit, the paper size standard selected at
this setting must be specified for each roll paper drawer.
Auto
When two rolls of different size standards are installed in a roll feed unit and Auto is
selected, the Printer identifies their roll widths automatically. If the Printer does not
identify the widths correctly, change the setting to the size standard you intend to
use.
When you intend to install the rolls of a specific size standard, you are
recommended to specify the size standard rather than Auto.
A series
A0 (841 mm (33.11 inches)), A1 (594.5 mm (33.11 inches)),
A2 (420.5 mm (16.56 inches)), A3 (297.3 mm (11.70 inches))
