IP-7900-20/21/7700-20/21 Advanced Operation Guide
92
M
-11
M
+2
Enter the value of the adjustment pattern where
each print head’s two lines overlap with the least
misalignment.
For example, on the right adjustment patterns for
M7 print head, the two lines misalign at -11 while
they overlap to be one line at +2. So enter +2 for
the adjustment value.
4
# M A N U A L B I D I R A D J U S T
# A D J 2 L M 7
[
+ 0 2
Press the
key.
5
# M A N U A L B I D I R A D J U S T
# A D J 2 L M 7 > + 0 2
Adjust the ADJ2 R value and the values for the
other print heads with the same procedure.
Adjust the print linkage before or after automatic cleaning
In the DURING PRINT, automatic cleaning is performed even while the Printer is printing. In such a case, after the
cleaning, adjust the position of the linkage for the prints before and after the cleaning.
Enter the adjustment value based on the media back feed adjustment pattern.
Before this adjustment, set the cleaning mode to the DURING PRINT at MEDIA REG MENU.
■
Procedure
STEP 1 Print [BACK ADJ PRINT] adjustment pattern.
1
á
I N K
M E D I A R E G
â
ß
M E D I A M . A D V
à
Set the Printer to offline state and press the
key.
2
# S I N G . A D V
# E X E C U T E >
,
Select [BACK ADJ PRINT] with the
,
key.
3
# B A C K A D J P R I N T
# E X E C U T E >
Press the
key.
