OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-104
3.6.3
Starting the printer after replacing the print head
This guidance is displayed when starting the printer after executing the print head replacement
operation and replacing the print heads.
The printer starts and the carriage moves to the home position.
(A special initializing operation is performed.)
Move the cursor with the
Right
and
Left
buttons, and toggle a digit with the
Up
and
Down
buttons.
A digit that has been toggled disappears.
Finish the selection and press the
OK
button.
The
OK
button operation is disabled if incorrect print head combination is selected.
Note
To prevent unnecessary pump operation and ink waste, do not select numbers of print heads that
have not been replaced.
Check that a waste ink bottle is installed and press the
OK
button.
Install the ink suction tool and press the
OK
button.
Press the
OK
button.
Press the
OK
button and open the ink box cover.
START PRIMING PH?
OK?
◎
INSTALL
XXXXXXX
INK SUCTION TOOL
◎
>>REPLACE PRINT HEAD
BOTTLE IS EMPTY?
◎
REPLACE PRINT HEAD
PRINT HEAD : 1 3
◎
REPLACE PRINT HEAD
PRINT HEAD : 1234567
◎
INITIALIZING...
PLEASE WAIT
Summary of Contents for IP-6620
Page 567: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 5 Appendix 4 Blower Fan Wiring Diagram...
Page 568: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 6 Appendix 5 Actuator Wiring Diagram...
Page 572: ...OKI Data Infotech Corporation CONFIDENTIAL Appendix 10 Appendix 9 Subtank Unit Wiring Diagram...
