245
Troubleshooting
Vertical bands appear on the printout.
[Cause]
- The media advance adjustment value is not appropriate
for the media used.
- The media is curled or wrinkled.
ABCDE ABCDE
Basic image
Cause
Solution
The media advance adjustment value is
not appropriate for the media used.
(1) Fine adjust the media advance adjustment value in the ± 0.3% range.
- If the action in (1) did not solve the problem, execute the following.
(2) Change the print mode. *
1
*
2
The media is curled or wrinkled.
If the media is curled or wrinkled, refer to The media is curled or wrinkled and execute
the appropriate actions.
*1 Adjust the media advance adjustment value again.
*2 Note that the print speed differs depending on the mode selected.
Summary of Contents for IP-5630
Page 24: ...24...
Page 70: ...70 Loading the media...
Page 246: ...246 Troubleshooting...
Page 265: ...47106202EE Rev3...