Oki IP-5630, User Manual, Page: 224 / 265

224
Troubleshooting
Warning messages
After printing, occasionally you may see one of the following messages appear on the operation panel with the
ERROR LED flashing. They are warning messages. In such cases, follow the instructions in the Action rows.
CHECK MEDIA
FOR WRINKLES
Meaning
The media has not been fed for a long time (about 250 min). Check the
media for wrinkles.
Action Perform one of the following actions.
(1) Release the pressure roller lever and remove the wrinkles.
(2) Execute FEED MEDIA and BACK FEED MEDIA to remove the
wrinkles.
(3) If there are no wrinkles, press any button to remove the warning
message.
CHANGE THE HEIGHT
OF THE PRINT HEADS
Meaning
The print head height setting in the media setting of the media
currently used does not match the actual height setting of the print
heads.
Action
Perform one of the following actions.
(1) Execute CHANGE PH HEIGHT to set the actual print heads height
to the same height as the media setting.
(2) Check the height set in the media setting. If this setting is not
correct, set the print head height setting in the media setting to
the actual height of the print heads.
ADJUST BIDIRECTIONAL
PRINT POSITION
Meaning
Bidirectional print positions have not been adjusted.
Action Adjust the bidirectional print positions.
ADJUST MEDIA
ADVANCE VALUE
Meaning
Media advance adjustment value has not been adjusted.
Action
Adjust the media advance adjustment value.
PH RECOVERY
RECOMMENDED
Meaning It is recommended to perform cleaning (PH recovery) to prevent the
missing dots problem.
Action
Perform cleaning (PH recovery).
PERFORM
PH RECOVERY NOW
Meaning
Automatic cleaning will be performed when the next printing starts.
Action
Perform cleaning (PH recovery).
Performing cleaning in advance prevents automatic cleaning when the
next printing starts.
PERFORM
SHEET MOUNT CLEANING
Meaning Sheet mount cleaning has not been performed.
Action
Perform sheet mount cleaning.
WASTE INK BOTTLE IS
ALMOST FULL
Meaning The waste ink bottle is almost full.
Action
Prepare a new waste ink bottle.
See
Waste ink bottle check and replacement on
page 102
.