Oki IP-5630 User Manual Download Page 144

Page: 144 / 265

144

Advanced operations

Check the printer information

Press the MENU button during printing to check the printer information. Then press the

ONLINE

button to return

to the normal panel display.

Check the remaining ink level

During printing

PRINTING...
STANDARD ND BI

Press the

MENU

button.

WARNING INFO

Press the

Down

button to select

INK

INFORMATION

INK INFORMATION

Press the

button.

>INK INFORMATION

REMAINING INK

Press the

button.

CC:

ink color

XXX%: Remaining ink

>>REMAINING INK

CC XXX%

When the remaining ink (total ink - used ink) falls under 10%,
LOW is displayed.

Press the

and

Down

buttons to select the

color whose ink you want to check.

Summary of Contents for IP-5630










































































































































































































































































Search results

Summary of Contents for IP-5630

Reviews:

Oki IP-5630, User Manual, Page: 144 / 265

Search results

Summary of Contents for IP-5630

Reviews: