115
Maintenance
Missing dots are still found even after the cap cleaning...
If you still see missing dots even after the cap cleaning above, check the caps visually and remove foreign matters and
ink stains from them with a cleaning swab dampened with cap cleaning liquid.
Performing cleaning independently
1
PRINTER READY
01: PAPER / 1626mm
Press the
PH.RECOVERY
button.
You can perform PH recovery in the following situations.
- When the printer is idle online
- When the printer is offline
- During printing
- When the printer is in pause
2
PH. RECOVERY
2
NORMAL
Press the
OK
button.
NORMAL (cleaning) is not displayed if a given length
of media has been printed since the last cleaning
operation.
In this case, execute STRONG (strong cleaning).
(See
Strong cleaning
on
A check of the safe scanning sensors may be
performed during cleaning. In such a case, the
following message is displayed on the panel.
CHECKING SAFE SCAN
FUNCTION. PLS WAIT.
3
>NORMAL
XXXXXXX
BOTTLE IS EMPTY?
Press the
OK
button.
4
Y:YY: Required time
PH RECOVERING
REQUIRED TIME
Y:YY
The cleaning is complete.
An error occurs if the waste ink bottle is full. Follow the
instructions to replace the waste ink bottle.
(
Waste ink bottle check and
replacement
)
Start the print head cleaning.
Print head cleaning takes several minutes.
When the cleaning starts, the required time is displayed and
the time is counted down every 10 seconds.
PRINTER READY
01: PAPER / 1626mm
Online idle: Switches to online state
Offline: Stays offline
Printing: Resume printing
In pause: Stays in pause
Summary of Contents for IP-5630
Page 24: ...24...
Page 70: ...70 Loading the media...
Page 246: ...246 Troubleshooting...
Page 265: ...47106202EE Rev3...