Oki IP-5630, User Manual, Page: 104 / 265

104
Maintenance
D Wiper cleaning liquid check and supply
Supply wiper cleaning liquid with the procedure below in the following cases.
- When a printer message prompts you to do so.
- When you notice that the liquid level is low during a daily inspection. Generally, wiper cleaning liquid should be
supplied approximately once per month.
1
PRINTER READY
01: PAPER / 1626mm
Press the
MAINTENANCE
button.
2
MAINTENANCE
2
START MAINTENANCE
Press the Down button to select WIPER
MAINTENANCE .
3
MAINTENANCE
2 WIPER MAINTENANCE
Press the
OK
button.
4
>WIPER MAINTENANCE
2
REPLACE LIQUID
,
Press the Down button to select REPLACE
LIQUID , and then press the OK button.
5
>>REPLACE LIQUID
2
OK?
Press the
OK
button to start the operation.
To cancel the operation, press the
CANCEL
button.
6
OPEN COVERS, REPLACE
WIPER CLEANG LIQUID
Open the front cover, and then the capping
unit cover.
7
Raise the old wiper cleaning liquid bottle a
little and pull out the bottle after making sure
that all the liquid has flowed into the printer.
Note
‹
Visually check that the waste ink bottle is not full before
removing it.