1.LOADING PAPER
Doing Paper Settings 23
LO
AD
ING PA
PER
Setting paper type
When you place any special paper other than plain paper or that not used for normal copying, you need to set the
thickness and attribute into this equipment. For acceptable paper type, refer to the
Specifications Guide
.
The set paper type appears on the equipment status indication area with an icon.
When you select a paper type, you can confirm it with the icons displayed on the equipment status indication area as
shown below.
Thickness
(Paper Feed Unit, Paper Feed Pedestal, Large Capacity Feeder, Envelope Drawer)
*1 These types of paper cannot be accepted for the Large Capacity Feeder.
*2 The icon of this type of paper is accepted only when the envelope drawer is used.
Thickness
(MPT)
*1 Select Special 1 and Special 2 when you use waterproof paper, and select Special 3 when you use coated paper.
Icon
Thickness
—
Plain
Thick
Thick 1
*1
Thick 2
*1
Thick 3
*1
Recycled Paper
Envelope
*2
Icon
Thickness
Icon
Thickness
—
Plain
Transparency
Thin
Recycled Paper
Thick
Special 1
*1
Thick 1
Special 2
*1
Thick 2
Special 3
*1
Thick 3
Envelope
Thick 4
