Oki ES9455, Software Setup Manual

Page: 157 / 386

8.[Administration] Tab Page
[Setup] Item List 155
8 [Administration] Tab Page
‰ Setting up LDAP Session
In LDAP Session, you can enable or disable the LDAP directory service.
Item name Description
1 Enable LDAP Select whether the LDAP directory service is enabled or disabled. [Enable] is set as the
default.
2 Attribute 1 Enter the name of the schema corresponding to the LDAP server configuration. You can
enter up to 22 alphanumerical characters and symbols other than =, ; (semicolon), #, and \
(backslash).
3 Attribute 2 Enter the name of the schema corresponding to the LDAP server configuration. You can
enter up to 22 alphanumerical characters and symbols other than =, ; (semicolon), #, and \
(backslash).
4 Search Method Select search conditions for LDAP searching.
y Partial match — Select this to search information partially matching the search
conditions.
y Prefix match — Select this to search information that starts with contents matching the
search conditions.
y Suffix match — Select this to search information that ends with contents matching the
search conditions.
y Full match — Select this to search information fully matching the search conditions.
1
2
3
4