Oki ES9170 MFP, Quick Start Manual

Page: 75 / 92

6
Specifications of Equipment
This section describes the types of acceptable paper, sheet capacity of each feeder and the specifications of the equipment.
Specifications of Equipment
73
Acceptable paper
Feeder Media type Weight Maximum sheet capacity Paper size
Drawers
PLAIN
64 - 80 g/m 2
17 - 20 lb. Bond
600 sheets (64 g/m 2 , 17 lb. Bond)
550 sheets (80 g/m
2
, 20 lb. Bond)
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R,
FOLIO
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"
LG, 8.5" SQ
K format:
8K, 16K, 16K-R
THICK1
81 - 105 g/m 2
21 - 28 lb. Bond
450 sheets
Large Capacity
Feeder (optional)
PLAIN
64 - 80 g/m
2
17 - 20 lb. Bond
2360 sheets (64 g/m
2
, 17 lb. Bond)
2000 sheets (80 g/m 2 , 20 lb. Bond)
A4, LT
THICK1
81 - 105 g/m
2
21 - 28 lb. Bond
1660 sheets
Bypass tray
THIN
*1, *2
52 - 63 g/m
2
14 - 17 lb. Bond
1 sheet
A/B format:
A3, A4, A4-R, A5-R, A6-R, B4,
B5, B5-R, FOLIO
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"
LG, 8.5" SQ
K format:
8K, 16K, 16K-R
Non-Standard size:
Length: 100 - 297 mm (3.9 -
11.7"),
Width: 148 - 432 mm (5.8 - 17")
PLAIN
*3
64 - 80 g/m
2
17 - 20 lb. Bond
100 sheets (64 g/m
2
, 17 lb. Bond)
100 sheets (80 g/m 2 , 20 lb. Bond)
THICK1
81 - 105 g/m 2
21 - 28 lb. Bond
80 sheets
THICK2 *1, *4
106 - 163 g/m 2
29 lb. Bond - 90 lb. Index
40 sheets
THICK3 *1
164 - 209 g/m 2
91 - 110 lb. Index
30 sheets
TRANSPARENCY *1
—
1 sheet A4, LT
ENVELOPE
*1, *5
—
1 sheet
DL: 110 mm x 220 mm (4.33" x
8.66")
COM10: 105 mm x 241 mm
(4.13" x 9.49")
Monarch: 98 mm x 190 mm
(3.86" x 7.48")
CHO-3: 120 mm x 235 mm
(4.72" x 9.25")
YOU-4: 105 mm x 235 mm
(4.13" x 9.25")
TAB PAPER
*1
— —
A4, LT
*1 Automatic duplex copying is not available.
*2 When the Saddle Stitch Finisher (MJ-1106) is installed, the paper exits on the upper tray.
*3 For printing on the tracing paper, select “PLAIN” as the media type. Automatic duplex copying is not available.
*4 For printing on the sticker labels, select “THICK2” as the media type. Place the sheets one by one on the bypass tray.
*5 Printing on the back side of an envelope is not possible.