Oki ES9160 MFP/ES9170 MFPES9460 MFP Scanning Manual Download Page 31

Page: 31 / 116

2 BASIC OPERATION

Scan to USB 29

Scan to USB

The Scan to USB function stores scans to a USB storage device.



To store data in a USB storage device, the Save to USB Media setting must be enabled by the administrator. For
details, refer to the

TopAccess Guide



USB storage devices must meet requirements below. However, some USB storage devices may not be used with
this equipment even though the requirements below are met.

- FAT16 or FAT32 format
- Single-partition (USB storage devices with multiple partitions are not supported.)

Scanning to USB

Place the original(s).

For help, refer to the

Quick Start Guide

On the control panel, press the [SCAN] button to
enter the SCAN menu.

To store scans in a USB storage device, connect the
device to the equipment and wait a few seconds.

Connect the USB storage device to the USB port. For the location
of the USB port on the equipment, refer to the

Quick Start Guide

USB Port

USB Storage Device

Summary of Contents for ES9160 MFP/ES9170 MFPES9460 MFP




















































































































Search results

Summary of Contents for ES9160 MFP/ES9170 MFPES9460 MFP

Reviews:

Related manuals for ES9160 MFP/ES9170 MFPES9460 MFP

Brands by name

Popular brands

Oki ES9160 MFP/ES9170 MFPES9460 MFP, Scanning Manual

Search results

Summary of Contents for ES9160 MFP/ES9170 MFPES9460 MFP

Reviews:

Related manuals for ES9160 MFP/ES9170 MFPES9460 MFP

Brands by name

Popular brands