- 93 -
5. Management / Setting the Printer
If the power supply is cut off when the machine is turned on, the machine does not
automatically turn on after the power is restored.
If you want to set the machine automatically resumes after the power supply is restored,
select [Boot Menu] and set [After AC power supply fails] to [Always On] or [Last State].
The operation that uses an uninterruptible power supply (UPS) or inverter is not guaranteed.
Do not use an uninterruptible power supply (UPS) or inverter.
By the factory default, when the power supply is cut off, the machine works as follows.
If a Power Failure Occurs
Machine's Status
Operation
During a reception
The reception stops halfway.
Printing a report
Printing stops halfway.
When the power is restored, start the print job again.
Standby
You cannot start printing.
