Oki ES8434 Advanced Manual Download Page 192

Page: 192 / 195

- 192 -

7. Using from a Mobile Device

• This machine may take 2 to 3 minutes to join a network after power-on. Make sure that the machine is connected

to the network before attempting to print.

• For Linux or Chromebook, please update the software to the latest version before printing.

• "Printer not found" is displayed on Linux or Chromebook

Is there paper in the tray?

Check the message informing you
that paper runs out.

Error Messages (User's
Manual)

When an Error Message
Appears on the Display Screen
(When the ATTENTION
Indicator Lights Up/Blinks)
(User's Manual)

Is there toner in the toner cartridge? Check the message informing you

that toner runs out.

Error Messages (User's
Manual)

When an Error Message
Appears on the Display Screen
(When the ATTENTION
Indicator Lights Up/Blinks)
(User's Manual)

Is AirPrint set to [Enable]?

Press the scroll button

several

times and check the status of
[AirPrint]. When [Disable] is displayed,
AirPrint is not available.

Is an error displayed?

Check the error message.

Error Messages (User's
Manual)

When an Error Message
Appears on the Display Screen
(When the ATTENTION
Indicator Lights Up/Blinks)
(User's Manual)

Point to check

Solution

Reference

Troubleshooting for IPP Everywhere

Point to check

Solution

Reference

Is the power supply of this machine
turned on?

Turn on the power supply of this
machine.
If the power supply is on, turn it off
and then back on, and then check if
the problem is resolved.

Turning On the Power (User's
Manual)

Turning Off the Power (User's
Manual)

Is the machine connected to the
same network as the Linux or
Chromebook device?

Check if this machine is displayed on
the print screen of Linux or
Chromebook.
If this machine is not displayed, check
the IP address.

Is the latest firmware installed?

Check that the firmware of this
machine or the software of Linux or
Chromebook is of the latest versions.
If it is not of the latest version, update
it to the latest versions.

Is there any paper?

Check that the out-of-paper message
is not displayed.

Error Messages (User's
Manual)

When an Error Message
Appears on the Display Screen
(When the ATTENTION
Indicator Lights Up/Blinks)
(User's Manual)

Is there any toner?

Check that the out-of-toner message
is not displayed.

Error Messages (User's
Manual)

When an Error Message
Appears on the Display Screen
(When the ATTENTION
Indicator Lights Up/Blinks)
(User's Manual)

Summary of Contents for ES8434




































































































































































































Search results

Summary of Contents for ES8434

Reviews:

Related manuals for ES8434

Brands by name

Popular brands

Oki ES8434, Advanced Manual

Search results

Summary of Contents for ES8434

Reviews:

Related manuals for ES8434

Brands by name

Popular brands