- 81 -
5. Management / Setting the Printer
• SIDM Setup
• IBM PPR Setup
Font Pitch
10.00 CPI
Sets the width of the PCL default font. Available range:
0.44 to 99.99 CPI. (0.01 CPI increments)
Font Height
12.00 point
Sets the height of the PCL default font. The height is
displayed to two decimal points (at 0.25 point intervals).
Symbol Set
PC-8
Selects a PCL symbol set.
A4 Print Width
78 column
Sets the number of columns for automatic line feed on
A4 paper for PCL. The number of columns is based on
when the font pitch is 10CPI and the Auto CR/LF mode is
set to off.
White Page Skip
Off
Sets whether to eject a blank page when an FF
command (0CH) is received in PCL.
CR Function
CR
Sets the printer operation when a CR code is received in
PCL.
LF Function
LF
Sets the printer operation when a LF code is received in
PCL.
Print Margin
Normal
Sets the non-printable area of page.
True Black
Off
PCL: Sets whether to use composite black (CMYK
mixed) or true black (K only) for the 100% black area of
an image.
Pen Width Adjust
On
When the minimum line width is specified in PCL, a 1 dot
line may look like a broken line. This mode adjusts fine
lines so that they look like solid lines.
Tray ID#
MPTray
4
Sets a number of MP tray for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
Tray1
1
Sets a number of tray 1 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
Tray2
5
Sets a number of tray 2 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
This menu is displayed only when the tray 2 is installed.
Tray3
20
Sets a number of tray 2 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
This menu is displayed only when the tray 3 is installed.
Tray4
21
Sets a number of tray 2 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
This menu is displayed only when the tray 4 is installed.
Tray5
22
Sets a number of tray 2 for the paper feed destination
command (ESC&l#H) in PCL5 emulation.
This menu is displayed only when the tray 5 is installed.
Item
Factory
Default
Description
Item
Factory Default
Description
SIDM Manual ID#
2
Sets up Pn specified in MANUAL by MANUAL-1 ID
No.FX/PPR Emu in CSF control command (ESC EM
Pn).
SIDM Manual2 ID#
3
Sets up Pn specified in MANUAL by MANUAL-2 ID
No.FX/PPR Emu in CSF control command (ESC EM
Pn).
SIDM MP Tray ID#
4
Sets up Pn specified TRAYO (MP Tray) by MP Tray ID
No.FX/PPR Emu in CSF control command (ESC EM
Pn).
SIDM Tray1 ID#
1
Sets up Pn specified TRAY 1 by Tray 1 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
SIDM Tray2 ID#
5
Sets up Pn specified TRAY 2 by Tray 2 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
SIDM Tray3 ID#
6
Sets up Pn specified TRAY 3 by Tray 3 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
SIDM Tray4 ID#
7
Sets up Pn specified TRAY 2 by Tray 2 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
SIDM Tray5 ID#
8
Sets up Pn specified TRAY 2 by Tray 2 ID No.FX/ PPR
Emu in CSF control command (ESC EM Pn).
Item
Factory Default
Description
Character Pitch
10 CPI
Specifies character pitches in IBM PPR emulation.
Font Condense
12 CPI to 20 CPI
Specifies 12CPI pitches for Condense Mode.
Character Set
SET-2
Specifies a character set.
Symbol Set
IBM-437
Specifies a symbol set.
Letter O Style
Disable
Specifies the style that replaces 9BH with letter o and
9DH with a zero.
Zero Character
Normal
Sets the zero to be slashed or unslashed.
Line Pitch
6 LPI
Specifies the line spacing.
White Page Skip
Off
Selects whether to print blank pages.
CR Function
CR
Selects a carriage return from [CR] or [CR+LF].
LF Function
LF
Selects a line feed from [LF] or [LF+CR].
Line Length
80 Column
Specifies the number of characters per line.
Form Length
11.7 inch or 11 inch *
1
Specifies the length of paper.
TOF Position
0.0 inch
Specifies the distance from the top edge of paper.
Left Margin
0.0 inch
Specifies the distance from the left edge of paper so that
the print starting point shifts to the right horizontally.
