Oki ES8140 User Manual Download | Manualshive

Page: 2 / 83

background image

Preface > 2

P

REFACE

Every effort has been made to ensure that the information in this document is complete,

accurate, and up-to-date. The manufacturer assumes no responsibility for the results of

errors beyond its control. The manufacturer also cannot guarantee that changes in software

and equipment made by other manufacturers and referred to in this guide will not affect

the applicability of the information in it. Mention of software products manufactured by

other companies does not necessarily constitute endorsement by the manufacturer.
While all reasonable efforts have been made to make this document as accurate and helpful

as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or

completeness of the information contained herein.

The most up-to-date drivers and manuals are available from:

www.okiexecutiveseries.com

07112901 Iss.01; Copyright © 2010 Oki Europe Ltd. All rights reserved.
Oki is a registered trademark of Oki Electric Industry Company, Ltd.
Oki Printing Solutions is a trademark of Oki Data Corporation.
Hewlett-Packard, HP, and LaserJet are registered trademarks of Hewlett-Packard

Company.
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
ENERGY STAR is a trademark of the United States Environmental Protection Agency.
Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Computer.
Other product names and brand names are registered trademarks or trademarks of their

proprietors.

As an ENERGY STAR Program Participant, the manufacturer has determined
that this product meets the ENERGY STAR guidelines for energy efficiency.

1

This product complies with the requirements of the Council Directives 2004/

108/EC (EMC), 2006/95/EC (LVD),1999/5/EC (R&TTE) and 2009/125/EC

(EuP), as amended where applicable, on the approximation of the laws of the

member states relating to Electromagnetic Compatibility, Low Voltage, Radio

& Telecommunications Terminal Equipment and Energy Using Products.

The following cables were used to evaluate this product to achieve EMC directive
2004/108/EC compliance and configurations other than this may affect that compliance.

1. If the centronics (parallel) port is enabled, the product is no longer Energy Star compliant.

CABLE TYPE

LENGTH

(METRE)

CORE

SHIELD

Power

1.8

✘

✘

USB

5

✘

✔

Parallel

1.8

✘

✔

LAN 15

✘

✘

«
1
2
3
4
...
»

Summary of Contents for ES8140




















































































Reviews:

No comments

Related manuals for ES8140

Brand: QMS Pages: 86

Brand: Canon Pages: 684

Brand: BIXOLON Pages: 29

Brand: Evolis Pages: 45

Brand: Oki Pages: 80

Phaser 6700V/DX

Brand: Xerox Pages: 162

ECOSYS FS-C5350DN

Brand: Kyocera Pages: 178

ColorPainter M-64S

Brand: Oki Pages: 84

Brand: Epson Stylus Pages: 2

Nuvera 100 roduction Systems

Brand: Xerox Pages: 70

LaserMatrix LM2405

Brand: Output Technology Pages: 249

WorkCentre 5845

Brand: Xerox Pages: 14

C11C418001 - Stylus C60 Inkjet Printer

Brand: Epson Pages: 64

C11C417001 - Stylus Photo 820 Color Inkjet Printer

Brand: Epson Pages: 2

C11C417001 - Stylus Photo 820 Color Inkjet Printer

Brand: Epson Pages: 2

C11C294131BZ - LX 300+ B/W Dot-matrix Printer

Brand: Epson Pages: 100

C117001-N - DFX 5000+ B/W Dot-matrix Printer

Brand: Epson Pages: 186

Brand: Oki Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands