Oki ES5442, Advanced Manual, Page: 202 / 255

- 202 -
7. Utility Software
You can control access to the machine by using a MAC address. You can allow for or reject
access from a specified MAC address.
Be sure to specify the correct MAC address. An incorrect entry of a MAC address does not allow for access to the
machine from a network.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [Security] > [MAC Address Filtering].
5
Specify detailed settings by following the on-screen instructions.
• If nothing is registered in [Administrator's MAC Address to Register], access to the machine may not be
allowed depending on the specified MAC address.
• If you use a proxy server, [Your Current Local Host/Proxy MAC Address] and the MAC address of your host
may not match.
6
Click [Submit].
The new settings take effect when the network function of this machine restarts.
You cannot specify to accept or to reject for each address.
To use this function, you need to set up your mail server in advance.
E-mail Setup (Web Page)
Setting to Send an E-mail Alert if an Error Occurs
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [E-mail] > [Alert Settings].
5
Enter an e-mail address to receive a notification in [Failure Notification
Settings].
6
Click [Setting] of the entered e-mail address.
If you want to apply the notification conditions to another address, click [Copy].
7
Select [Upon occurrence of an event] in [Way of E-mail Alerting], and then
click [To Step 2].
8
Specify detailed settings by following the on-screen instructions.
If you insert a check in any errors or warnings that require notification, a window to
specify the time difference between the sending of the notification and the occurrence
of the error is displayed.
9
Click [OK].
10
Click [View a summary of current configuration] to check the current settings,
and then click [x] to close the window.
You can check the current settings of up to two addresses in the main window. Select
the address you want to check from the list box.
11
Click [Submit].
The new settings take effect when the network function of this machine restarts.
Limiting by Using a MAC Address (MAC Address Filtering) E-mail Alert