
- 132 -
5. Operating Management/ Specifications
• Default Mode
• Operation Clear
• Sound Control
• Local Interface*
1
• System Setup
• Power Save
Manage Unit
Item
Factory
default
setting
Description
Default Mode
Home
Sets the default mode screen of this machine.
Item
Factory
default
setting
Description
Operation Timeout
3
Sets time for automatic reset of screen to begin.
Available range: 1 to 10 minutes
Clear After Job
OFF
Sets whether to reset after job is completed.
Item
Factory
default
setting
Description
Key Touch Tone Volume
Middle
Sets the volume of the key-touch tone.
JAM Buzzer Volume
Middle
Sets the volume for the paper jam alert tone.
AirPrint Buzzer Volume
Low
Sets the AirPrint confirmation operation sound.
Item
Factory
default
setting
Description
USB Menu
Soft Reset
Disable
Sets whether to enable the soft reset command.
Speed
480Mpbs
Selects the maximum transfer speed of USB interface.
Offline Receive Disable
Set whether to receive data in offline state or in recoverable
error state.
Serial Number
Enable
Sets whether to use a USB serial number.
Connected
Host
Normal
Sets a host to be connected.
Item
Factory
default
setting
Description
Access Control
Disable
Sets access control.
Default Authent. Method Sett.
Local Name
Available only when [Access Control] is set to [Enable].
Unit of Measure
Millimeter or
Inch
Selects a displayed unit (millimeter / inch).
Default Paper Size
A4 or Letter
Sets the default paper size.
Date Format
dd/mm/yyyy or
mm/dd/yyyy
Sets the date format.
Allow All Reports To Print
Disable
Sets whether to allow printing reports with personal
information.
Near Life LED
Enable
Sets whether to light an LED if a near life warning occurs.
Status in Near Life
Enable
Sets whether to display a message if a near life warning
occurs.
USB Memory Interface
Enable
If [Disable] is set, the print from USB Memory function cannot
be used.
Panel Brightness During
Operating
7
Sets the LCD panel brightness.
Available range: 1 to 7 (1 increments)
Panel Brightness While Power
Save
0
Sets the LCD panel brightness.
Available range: 0 to 7 (1 increments)
Panel Calibration
Execute
Executes LCD panel calibration.
Item
Factory
default
setting
Description
Power Save Time
1 minute
Sets when to enter Power Save mode.
Sleep Time
15 minutes
Sets when to enter Sleep mode.
Auto Power Off Time
4 hours
Sets when to enter Auto Power Off.
Silent Mode
ON
Specifies a print preparation operation when entering standby
status from Sleep mode.
If [ON] is set: it is quiet as there is no print preparation.
If [OFF] is set: there is a rotation noise of the image to perform
print preparation but you can start first printing early.
ECO Mode*
1
ON
If [ON] is set: Printing starts even before the temperature of the
fuser reaches the prescribed degrees, if the job is small.
If [OFF] is set: Printing starts after the temperature of the fuser
reaches the prescribed degrees.
Summary of Contents for ES5442
