3
3-78 Using Command WorkStation or Command WorkStation LE
ES3640e MFP EFI Job Management Guide - 78
A destination queue is available only if the administrator enabled
it in Setup (see the
).
If you choose Hold, the job is imported into the Active Jobs
window and held for future action.
If you choose Print, the job is imported into the Active Jobs
window and released for immediate printing.
If you choose Direct, the job is sent directly to the Fiery for
printing. The job does not appear in the Active Jobs window or
Printed Jobs panel.
Using job management commands
As the operator, you can issue the following job management
commands from the Actions menu to release or hold selected jobs
in the Active Jobs window and Printed Jobs panel:
• Process and Hold
• Print and Hold
• Remove Raster Data
• Hold
The availability of each command varies, depending on the
context of the selected job. In addition to choosing these
commands from the Actions menu, you can issue them from
context-sensitive menus. Activate the Print, Hold, and Process and
Hold commands using the Action buttons.
Summary of Contents for ES3640eMFP
Page 1: ......
