3
3-69 Starting up and logging in
ES3640e MFP EFI Job Management Guide - 69
Note:
In Command WorkStation, a user may be logged in as
Administrator on one Fiery, as Operator on a second Fiery, and as
Guest on a third Fiery. In these instances, the levels of access are
dependent either on the Fiery currently selected in the Active Jobs
window or on the Fiery that holds the currently selected job.
By default, no passwords are set on the Fiery—in this default
state, anyone can perform Setup and use all Command
WorkStation and Command WorkStation LE functions. Until an
Administrator password is defined in Fiery Setup, you can log in to
the Fiery as an Administrator without entering a password and are
given full privileges.
After the administrator has performed Setup and specified
passwords, Command WorkStation and Command WorkStation LE
user options depend on your login level. This manual assumes
that you are logged in to the Fiery as Operator.
Guest
Can view job status, but cannot make changes to jobs
or Setup, and cannot access the Job Log; no password
required.
Access level
Privileges and password requirements
Summary of Contents for ES3640eMFP
Page 1: ......
